Hydranautics SWC5-LD-8040 RO Membrane Nitto

Hydranautics SWC5-LD-8040 RO Membrane Nitto - Solusi Filtrasi Seawater Reverse Osmosis

SWC (Sea Water Composite)

No one does seawater desalination better

As the world is facing freshwater scarcity, Hydranautics brings a range of SWC RO membranes to meet the demands of desalination industry. SWC membranes have improved the productivity and salt rejection for more than two decades while reducing their environmental impact. SWC membranes come in a range of innovative formulations depending on the level of seawater salinity d.

SWC membranes come in a range of innovative formulations suitable for varying degrees of seawater salinity. Each offers the highest productivity and salt rejection rates in the industry combined with the optimized flow, low fouling and low energy consumption.

This exceptional performance and consistency creates demand for SWC membranes in seawater desalination and high TDS industrial waste water treatment applications, including conventional and hybrid designs.

Specification Hydranautics SWC5-LD-8040 RO Membrane

· Permeate Flow: 9,000 gpd (34.1 m3/d)

· Salt Rejection: 99.8% (99.7% minimum)

· Test Conditions: 32000 ppm NaCl solution

o 800 psig (5.5 MPa) Applied Pressure

o 77 ^oF (25 ^oC) Operating Temperature

o 10% Permeate Recovery

o 6.5 - 7.0 pH Range

· Configuration: Low Fouling Spiral Wound

· Membrane Polymer: Composite Polyamide

· Membrane Active Area**: 400 ft2 (37.2 m2)

· Feed Spacer: 34 mil (0.86 mm)