DOW FILMTEC HSRO-390-FF
Untuk informasi harga dan stock barang hubungi kami 081385066789
DOW™ FILMTEC™ HSRO heat sanitizable reverse osmosis membrane elements deliver exceptional quality water with the added capability to withstand sanitization with hot water. HSRO elements, manufactured on advanced automated equipment, have the highest active membrane area available in the industry today. This high area allows system designs with either lower operating flux or cost savings from fewer membrane elements. The full-fit configuration minimizes stagnant areas and is an ideal choice for applications requiring a sanitary design. All components comply with U.S. Food & Drug Administration standards.
|
Nominal Active Surface Area
ft2 (m2)
|
Permeate Flow Rate
gpd (m3/d)
|
Stabilized Salt Rejection
(%)
|
|
390 (36)
|
9,000 (34)
|
99.5
|
· Permeate flow and salt rejection based on the following test conditions: 2000 ppm NaCl, 150 psig (10.3 bar), 77°F (25°C) and 15% recovery.
· Elements must be conditioned prior to start-up. A one-time flux loss will occur during stabilization. Listed values apply after performance stabilization.
· Permeate flow rates for individual elements may vary +/-20%.
· Sales specifications may vary as design revisions take place.
